OPEN NOW

Termite and pest control across Melbourne

Professional termite inspections, chemical soil barriers, and residential pest eradication across Melbourne carried out by licensed technicians, with urgent callouts from 60 minutes. Visual termite inspections follow Australian Standard AS 4349.3 with thermal imaging and moisture detection included. All prices are planning ranges with every job quoted individually after on-site evaluation, supported by 24-hour emergency availability.

Pest & Termite Services Across Melbourne

All treatments are carried out by licensed pest control technicians in accordance with registered APVMA product labels and relevant Australian Standards.

Termite Inspections AS 4349.3 Visual Method
Non-invasive thermal and acoustic examination of roof voids, subfloors, internal framing, and external grounds within 30 metres of the building and inside the property boundaries, as AS 4349.3 defines the site.
Termite Treatment & Soil Barriers AS 3660.2 Existing Buildings
Continuous chemical soil barriers trenched to footing level, non-repellent termiticide applications, and active colony eradication.
Independent structural pest assessment before property acquisition, identifying past termite damage, fungal decay, and high-risk moisture zones.
General Pest Control APVMA Registered Formulations
Targeted residential barrier sprays for spiders, cockroaches, silverfish, and nuisance ants across interior skirtings and external perimeters.
Rodent Control & Baiting Tamper-Resistant Stations
Eradication of roof rats and house mice using lockable external bait stations, ceiling void baiting, and structural entry-point identification.
Cockroach Control Targeted Gel & Residuals
Clean-out treatments for German cockroaches in kitchens and residual perimeter applications for Australian and American cockroaches.
Ant Control Non-Repellent Transfer Chemistry
Colony eradication for black house ants, coastal brown ants, and carpenter ants using slow-acting non-repellent baiting technology.
Spider Control Direct & Residual Treatment
Eradication of redbacks, white-tailed spiders, and huntsman spiders across external weep holes, eaves, subfloor spaces, and sheds.
Commercial Pest Management HACCP & Health Regs
Scheduled pest maintenance, logging folders, and compliance documentation for hospitality venues, food warehouses, and logistics facilities.

Why termite management in Melbourne's west is different

The Western Plains of Melbourne sit on heavy volcanic basalt clay. Under AS 2870, these reactive soils are classified as Class H (highly reactive) or Class E (extremely reactive). In dry summer months the clay shrinks, opening ground fissures around perimeter footpaths. When winter rains arrive, the clay swells and puts hydraulic pressure on concrete foundations.

The vast majority of residential homes built in Werribee, Tarneit, Point Cook, and Truganina over the last thirty years use concrete slab-on-ground construction. Because there is no accessible subfloor cavity, subterranean termites (predominantly Coptotermes acinaciformis) enter through concealed shrinkage cracks beneath tiled floors, plumbing penetrations, or external brick weep holes bridged by soil and garden mulch.

Applying an effective termite treatment on reactive clay requires specialised trenching. The soil must be excavated down to the top of the concrete footing (minimum 300mm depth) and saturated with non-repellent liquid termiticide. Where concrete paths or driveways abut the slab, we core-drill through the concrete at 200mm intervals to establish a continuous chemical soil barrier under AS 3660.2.

Our termite inspections rely on high-output optical inspection torches, calibrated surface moisture meters, and thermal imaging cameras. These tools locate thermal signatures created by termite nesting activity inside wall cavities without causing unnecessary damage to internal plasterwork. Review our guide on what our termite report includes for a breakdown of accessible inspection zones.

Melbourne Standard Pest Control Price Schedule

Transparent price guidelines for domestic pest and timber pest services. Exact quotes are provided prior to commencement based on property size, construction method, and perimeter measurement.

Service Description Price (AUD)
Visual Termite Inspection (AS 4349.3)
Complete interior, subfloor crawl space, roof cavity, and grounds within 30m of the building.
$280 to $420
Pre-Purchase Timber Pest Inspection
Comprehensive pre-purchase inspection to AS 4349.3 with written report delivered within 24 hours.
$350 to $550
Chemical Soil Barrier (Perimeter)
Trenching 300mm deep to concrete footing, termiticide injection, and precision slab core drilling.
$2,800 to $5,000
General Pest Treatment
Internal skirting barrier spray and external perimeter treatment targeting spiders, ants, and cockroaches.
$190 to $350
Rodent Treatment & Baiting Program
Tamper-resistant lockable bait stations in roof void, subfloor, and external perimeter rodent runs.
$220 to $400

Prices in AUD. Every quote is confirmed before starting work. Chemical soil barriers are priced following on-site linear perimeter measurement.

What our AS 4349.3 inspection report documents

A thorough timber pest inspection results in an itemised technical report, not a handwritten checklist. Every inspection documents moisture readings in wet areas, high-resolution photographic evidence of timber decay or mud tubes, thermal scan findings, and accessible structural boundaries.

Thermal & Moisture Logs

Calibrated moisture levels recorded around bathroom wall cavities, plumbing entries, and external slab perimeters.

Risk Factors & Conducive Zones

Documentation of leaking downpipes, bridged weep holes, inadequate subfloor clearance, and untreated garden timbers.

Melbourne Western Suburbs Service Coverage

Local pest control coverage focused on the expansive clay soils and residential construction of Melbourne's western corridor.

Werribee 3030 Rapid callouts across established residential allotments, subfloor framing, and river precinct properties.
Point Cook 3030 Slab-on-ground inspections addressing reactive clay soil shrinkage and concealed perimeter weep hole bridging.
Hoppers Crossing 3029 Timber pest detection and chemical barrier trenching across established brick-veneer residential homes.
Tarneit 3029 Termite defence and pre-purchase timber inspections for modern dwellings constructed on Class H basalt clay.
Truganina 3029 Industrial facility vermin management and residential perimeter soil treatments across growth estates.
Altona 3018 Subterranean termite protection and general domestic pest treatments across coastal plain properties.

Frequently Asked Questions

Direct technical answers regarding pest eradication methods, Victorian licensing rules, and termite inspection standards.

Do I need to leave the house during a termite inspection?

No. A visual timber pest inspection is non-invasive and does not involve airborne chemical sprays. You are welcome to accompany the attending technician as accessible areas of your home are inspected.

What Australian Standards apply to your inspections and treatments?

All visual termite inspections follow the Australian Standard AS 4349.3 (Inspection of buildings: Timber pest inspections). Chemical soil barriers and structural termite treatments comply with Australian Standard AS 3660.2 (Termite management in and around existing buildings).

Do you use thermal imaging during termite inspections?

Yes. Every visual timber pest inspection includes thermal imaging and calibrated moisture meters as standard diagnostic equipment. These non-invasive tools identify thermal differentials and moisture anomalies inside wall framing without cutting plaster.

How much does a chemical soil barrier cost, and how long does it take?

A perimeter chemical soil barrier on a standard Melbourne brick-veneer home has an indicative planning range of $2,800 to $5,000, depending on the property perimeter length and the amount of concrete paths requiring drilling. Installation takes a full day (6 to 8 hours). Every job is quoted individually after on-site evaluation.

Who performs the treatment, and how is licensing handled in Victoria?

All treatments are carried out by licensed pest control technicians holding valid licences from the Victorian Department of Health. In Victoria, licensing attaches to the individual attending technician, whose licence details appear directly on your completed written inspection report.

Speak Directly with an Attending Licensed Technician

Urgent dispatch available across Melbourne's western suburbs. All treatments are carried out by licensed pest control technicians with fixed quotes agreed before commencement.